首页 > 新闻动态 > > Applications of stainless steel tube fittings
新闻动态
新闻
  • NPT线程和NPTF线程之间的区别

    1. NPT和NPTF螺纹是美国最常用的锥形管螺纹,用于应用,从电管和扶手到运输气体或腐蚀性液体的高压线。NPT用于机械或低压气体以及需要使用密封剂...
  • 316不锈钢水管较厚

    316条不锈钢水管的产物质量在于其热量和压力抗性,而高温抗性和压力则是...
  • 2024年春节假期在中国,并注意客户

    亲爱的顾客,中国的2024年春节假期正在临近。祝大家在新的一年中一切顺利 运输通知: 对于需要在新年之前运送的货物,请在2月4日之前通知我们。官...
  • 咬合式管件

    公制螺纹咬合式管接头由主体,切割环和螺母三部分组成,当将切割环和螺母插入钢管上的接头体内并拧紧螺母时,切割的外端密封圈应安装在接头主体的...
  • 液压管件类型

    液压管件类型 1,NPTF锥形螺纹接头 注意:这是干密封螺纹;它是用于输送燃料的家用锥形管螺纹。它可用于外螺纹和内螺纹末端接头。 NPTF外螺纹可以...
  • The Standard for Common Tube Fittings

    National standard (GB), electricity standard (DL), petroleum and petrochemical standard (SY), mechanical department standard (JB), chemi...
  • 如何使用管道和管件

    液压系统的管件包括油管和管件,它们连接到各种类型的液压元件上,输送压力油的装置。 管道配件应具有足够的耐压强度(强度),无泄漏,压力损失...
  • 带旋转螺母的90度弯头减速器管接头

    90度弯头减速器管接头带旋转螺母伊顿型号:2C9,2D9派克型号:EW产品描述:DIN标准适配器,公制公头24°......
  • 卡套式管接头的安装方法和说明

    一,卡套连接器的安装方法: 1.锯切一段合适的无缝钢管,以去除端口上的毛刺。管道的端面应垂直于轴线,且角度公差不超过0.5°。如果需要弯曲管子...
  • 2021年新年快乐

    从2021年2月19日开始,全体员工已开始工作。 祝你新年快乐
联系我们
江苏宜城流体设备有限公司
销售经理:Jason Gao
电子邮件:sales01@yc-lok.com.

Applications of stainless steel tube fittings

Luna 2021-05-12 15:13:15
The tube fitting is a connecting tool between the tube and tube. It is an indispensable role in the tube, it is the main component of the hydraulic tube. Tube fittings are used for straight connections such as meters, socket connections or threaded connections.

There are many kinds of tube fittings, and the commonly used fittings can be generally divided into hard tube fittings and hose fittings. According to the connection method of fittings and tubes, there are three types of tube fittings: flared, ferrule, and welded. The hose fittings are mainly swaged hose fittings.

There are also different ways of connecting the pipes and fittings in the hydraulic system. The end connection of the pipe is the thread.

Cone thread is mainly used in low pressure hydraulic systems because of its own vertebral body tightening. Slim tooth thread sealing is very good, it’s usually used in high pressure systems. We need to fit the fittings body into the pipe, use the aforementioned gasket to seal the interface, seal the joint between the body and the pipe, and sometimes we also use a spherical seal.

Since the pipe joint belongs to a removable connecting element, it meets the requirements of stable connection, strong sealing, reasonable size, low pressure loss, good process performance, etc. Therefore, we should not underestimate the small fittings. Only the fittings can support the existence of the entire hydraulic system.