> 뉴스 > 사례 > Pipe clamp manufacturer direct sales in China
뉴스
사례
뉴스
  • NPT 스레드와 NPTF 스레드의 차이점

    1.NPT 및 NPTF 스레드는 전기 배관 및 난간에서 가스 또는 부식성 액체를 운반하는 고압 라인에 이르기까지 다양한 응용 분야에서 미국에서 가장 일반적으로 사...
  • 316 스테인레스 스틸 워터 파이프 더 두껍게

    316 스테인레스 스틸 워터 파이프의 제품 품질은 열과 압력 저항에 있으며, 고온 저항 및 압력은 ...
  • 유압 튜브 피팅의 종류

    유압 튜브 피팅의 종류 1, NPTF 원뿔형 나사 조인트 참고 : 이것은 실드 실입니다. 연료를 운반하는 데 사용되는 가정용 테이퍼 파이프 나사산입니다. 외부 및 ...
  • 바이트 타입 튜브 피팅

    미터법 바이트 형 튜브 피팅은 몸체, 절단 링 및 너트의 세 부분으로 구성됩니다. 절단 링 및 너트가 스틸 튜브의 조인트 몸체에 삽입되고 너트가 조여지면 절단...
  • 2024 중국에서 봄 축제 휴가 및 고객을위한 통지

    친애하는 고객, 중국의 2024 년 봄 축제 휴가가 다가오고 있습니다.새해에 모든 사람이 최선을 다하기를 바랍니다 배송 통지 : 새해 전에 배송 해야하는 선적의 ...
  • 튜브 및 튜브 피팅 사용 방법

    파이프 피팅의 유압 시스템에는 튜브 및 피팅이 포함되며 다양한 유형의 유압 구성 요소, 압력 오일 장치 전달에 연결됩니다. 파이프 피팅은 충분한 내압 (강도)...
  • 새해 복 많이 받으세요 2021

    2021 년 2 월 19 일부터 모든 직원이 일을 시작했습니다. 번영하고 번영하는 새해를 기원합니다
  • The Standard for Common Tube Fittings

    National standard (GB), electricity standard (DL), petroleum and petrochemical standard (SY), mechanical department standard (JB), chemical standard (...
  • 카드 슬리브 형 파이프 조인트 설치 방법 및 지침

    먼저, 카드 슬리브 커넥터 설치 방법 : 1. 포트에서 버를 제거하기 위해 적절한 길이의 이음매없는 강관을 보았습니다. 파이프의 끝면은 0.5 ° 이하의 각도 공...
  • 회전 너트를 가진 90도 팔꿈치 흡진기 관 접합기

    회전대 견과 Eaton를 가진 90도 팔꿈치 흡진기 관 접합기 모형 : 2C9, 2D9 파커 모형 : EW 제품 설명 : DIN 표준 접합기, 미터 male24 °.
문의하기
강소 Yicheng 유체 설비 유한 회사
영업 관리자 : Jason Gao.
이메일 : sales01@yc-lok.com.

사례

Pipe clamp manufacturer direct sales in China

Luna 2022-04-02 14:40:52
Pipe clamp manufacturer direct sales in China, Jiangsu Province. -trading from Jiangsu Yicheng Fluid Equipment Co.,Ltd.

How to choose? Or adjust in your application aiming to be cost effective
Some points for customers to choose, and sincerely hope we can do something for you.

1. Whether The quality of pipe clamp is good or bad, which is rooted in whether the combination of each component is precise.

2. The pipe clamp can be divided into light and heavy ones, and the suitable one is selected with high quality and low price.

3. The pipe clamp can be made of different materials. It is suitable for the environment, such as PP, suitable for the working environment, - 30 ° ~ + 90 °, PN < = 8Mpa, poly amide, - 40 ° ~ + 120, Al, - 50 ° ~ + 300 °, so as to ensure the practicability of the working environment.

4. The bottom plate has welding and stamping types. The welding quality will be better and the price will be higher. The bearing capacity of stamping will be lower and the price will be cheaper.

5. The materials of bolts and cover plates used together include SS304, SS316 and carbon steel galvanized. They are selected according to the corrosion degree of the environment.

Therefore, after selecting the one suitable for our own quality requirements, we only need to inform the (Tube O.D)outer diameter of the pipe, and then we can make an accurate quotation for our customer. The following is the reference of some pictures and drawings, if for more details, please email or call us directly!