> 뉴스 > 사례 > The importance of a small tube fittings for connection
뉴스
사례
뉴스
  • NPT 스레드와 NPTF 스레드의 차이점

    1.NPT 및 NPTF 스레드는 전기 배관 및 난간에서 가스 또는 부식성 액체를 운반하는 고압 라인에 이르기까지 다양한 응용 분야에서 미국에서 가장 일반적으로 사...
  • 316 스테인레스 스틸 워터 파이프 더 두껍게

    316 스테인레스 스틸 워터 파이프의 제품 품질은 열과 압력 저항에 있으며, 고온 저항 및 압력은 ...
  • 2024 중국에서 봄 축제 휴가 및 고객을위한 통지

    친애하는 고객, 중국의 2024 년 봄 축제 휴가가 다가오고 있습니다.새해에 모든 사람이 최선을 다하기를 바랍니다 배송 통지 : 새해 전에 배송 해야하는 선적의 ...
  • 바이트 타입 튜브 피팅

    미터법 바이트 형 튜브 피팅은 몸체, 절단 링 및 너트의 세 부분으로 구성됩니다. 절단 링 및 너트가 스틸 튜브의 조인트 몸체에 삽입되고 너트가 조여지면 절단...
  • 유압 튜브 피팅의 종류

    유압 튜브 피팅의 종류 1, NPTF 원뿔형 나사 조인트 참고 : 이것은 실드 실입니다. 연료를 운반하는 데 사용되는 가정용 테이퍼 파이프 나사산입니다. 외부 및 ...
  • The Standard for Common Tube Fittings

    National standard (GB), electricity standard (DL), petroleum and petrochemical standard (SY), mechanical department standard (JB), chemical standard (...
  • 튜브 및 튜브 피팅 사용 방법

    파이프 피팅의 유압 시스템에는 튜브 및 피팅이 포함되며 다양한 유형의 유압 구성 요소, 압력 오일 장치 전달에 연결됩니다. 파이프 피팅은 충분한 내압 (강도)...
  • 회전 너트를 가진 90도 팔꿈치 흡진기 관 접합기

    회전대 견과 Eaton를 가진 90도 팔꿈치 흡진기 관 접합기 모형 : 2C9, 2D9 파커 모형 : EW 제품 설명 : DIN 표준 접합기, 미터 male24 °.
  • 카드 슬리브 형 파이프 조인트 설치 방법 및 지침

    먼저, 카드 슬리브 커넥터 설치 방법 : 1. 포트에서 버를 제거하기 위해 적절한 길이의 이음매없는 강관을 보았습니다. 파이프의 끝면은 0.5 ° 이하의 각도 공...
  • 새해 복 많이 받으세요 2021

    2021 년 2 월 19 일부터 모든 직원이 일을 시작했습니다. 번영하고 번영하는 새해를 기원합니다
문의하기
강소 Yicheng 유체 설비 유한 회사
영업 관리자 : Jason Gao.
이메일 : sales01@yc-lok.com.

사례

The importance of a small tube fittings for connection

Luna 2022-07-08 16:22:25
Pipe/Tube joints are detachable connectors, which not only meet the requirements of normal connection stability, strong sealing, reasonable size, small pressure loss, and good process performance, but also meet the requirements of convenient disassembly and assembly.



There are many types of pipe/tube joints. Commonly used pipe joints can be divided into hard pipe joints and soft pipe joints. According to the connection method between the pipe joint and the pipeline, there are three types of hard pipe joints: flared type, ferrule type and welded type, and the hose joint is mainly a crimped hose joint.


There are also different connection methods between pipes and pipe joints in the hydraulic system, and the screwed end of the pipe is the connection thread. Tapered threads are mainly used in medium and low pressure hydraulic systems because they are screwed on by their own cones and sealed with Teflon. The fine thread has a good sealing effect and is often used in high pressure systems. However, it is necessary to seal the end face with a combined gasket or an O-ring, and sometimes a copper gasket is used, which is more suitable for connecting thick-walled pipes. The main components are joint bodies, receivers, nuts, etc. In applications, the joint body is embedded in the policy, the end faces are sealed by the gaskets described above, and the joint body and receiver are sealed by rubber, sometimes using the ball sealing method.