首页 > 新闻动态 > > YC-LOK jiangsu yicheng Fluid Equipment Co.,Ltd, professional fluid solution
新闻动态
新闻
  • NPT线程和NPTF线程之间的区别

    1. NPT和NPTF螺纹是美国最常用的锥形管螺纹,用于应用,从电管和扶手到运输气体或腐蚀性液体的高压线。NPT用于机械或低压气体以及需要使用密封剂...
  • 液压管件类型

    液压管件类型 1,NPTF锥形螺纹接头 注意:这是干密封螺纹;它是用于输送燃料的家用锥形管螺纹。它可用于外螺纹和内螺纹末端接头。 NPTF外螺纹可以...
  • 316不锈钢水管较厚

    316条不锈钢水管的产物质量在于其热量和压力抗性,而高温抗性和压力则是...
  • 2024年春节假期在中国,并注意客户

    亲爱的顾客,中国的2024年春节假期正在临近。祝大家在新的一年中一切顺利 运输通知: 对于需要在新年之前运送的货物,请在2月4日之前通知我们。官...
  • 咬合式管件

    公制螺纹咬合式管接头由主体,切割环和螺母三部分组成,当将切割环和螺母插入钢管上的接头体内并拧紧螺母时,切割的外端密封圈应安装在接头主体的...
  • 如何使用管道和管件

    液压系统的管件包括油管和管件,它们连接到各种类型的液压元件上,输送压力油的装置。 管道配件应具有足够的耐压强度(强度),无泄漏,压力损失...
  • The Standard for Common Tube Fittings

    National standard (GB), electricity standard (DL), petroleum and petrochemical standard (SY), mechanical department standard (JB), chemi...
  • 2021年新年快乐

    从2021年2月19日开始,全体员工已开始工作。 祝你新年快乐
  • 带旋转螺母的90度弯头减速器管接头

    90度弯头减速器管接头带旋转螺母伊顿型号:2C9,2D9派克型号:EW产品描述:DIN标准适配器,公制公头24°......
  • 卡套式管接头的安装方法和说明

    一,卡套连接器的安装方法: 1.锯切一段合适的无缝钢管,以去除端口上的毛刺。管道的端面应垂直于轴线,且角度公差不超过0.5°。如果需要弯曲管子...
联系我们
江苏宜城流体设备有限公司
销售经理:Jason Gao
电子邮件:sales01@yc-lok.com.

YC-LOK jiangsu yicheng Fluid Equipment Co.,Ltd, professional fluid solution

Luna 2022-04-15 11:01:43
YC-LOK jiangsu yicheng Fluid Equipment Co.,Ltd, professional fluid solution
Supply wide range of tube fittings, hose fittings, quick couplings, flanges, tube clamps, etc.

Tube fittings details!

1. Working principle
The ferrule joint compresses the ferrule through thread interlocking, and the ferrule deforms the pipe evenly to achieve the sealing effect. As shown in Figure 1, the pipe and ferrule need to be matched well. The pipe we generally use is cold drawn precision pipe with good sealing effect.

2. Characteristics
The connection of ferrule joint is very simple. Only one marker and two wrenches are needed to complete the installation, which is convenient for maintenance and can be disassembled and assembled repeatedly. Ferrule joint has good sealing performance and high cleanliness, so it is often used in high-purity gas pipeline. For ferrule joints ≤ 2 ", the nominal pressure can reach more than 20MPa. Ferrule joints also have detectability, and special gap detection can be used to check whether they are tightened.

3. Material
In addition to the common SUS316, there are brass, aluminum, alloy, carbon steel, nylon, PTFE, PFA, titanium and other materials. It should be noted that most manufacturers do not have SUS304.
4. Brand
Swagelok (Chinese name "世伟洛克") of the United States is commonly used. Its ferrule joint technology occupies a leading position in the world. Its brand has become synonymous with ferrule joint, a-lok of Parker company of the United States; Hy-Lok, super-lok, D-Lok and dk-lok of South Korea; fujkin (fujikin) of Japan and Bi-Lok of Ihara company of Japan. Yc-lok in China
5. Common type
According to different functions, it can be divided into: Union, elbow, tee, reducer, union cross, cap, plug, adapter, etc.
According to the connection mode of the joint, it can be divided into:

(1)Tube to Tube Union(All interfaces are tube lok, the most commonly used, as shown in Figure 2);
(2)Tube to Male/Female Pipe(One interface is threaded port and the other interface is tube Lok, as shown in Figure 3);
(3)Tube Stub Adapter(One end is a tube stub, as shown in Figure

4);Tube to Weld End(One end is a short pipe for welding, which can be tube pipe or pipe pipe, as shown in Figure

(5)other ;

6. Precautions for procurement

(1) There are many specifications and models of ferrule connectors (including adapter). When ordering, you must write clearly the name, specification and material. It is best to write the manufacturer's order number, such as the order number of 1 / 2 'sus 316 union elbow, Swagelok is ss-810-9, dk-lok is dl-8-s, yc-lok is yc-ue-8

(2) In fact, there are two kinds of tube officials: English system (such as 1 / 8 ', 1 / 4', 3 / 8 ', 3 / 4', 1 ') and metric system (such as 3, 8, 15, 20, 25mm) (both refer to the outer diameter of the pipe), but English system is commonly used. Therefore, the ferrule joint matched with tube can also be divided into British system and metric system, which should be explained when ordering.

(3) For the ferrule (or adapter) with threaded end, it is necessary to distinguish the type of branch pipe thread. There are two commonly used types; NPT (60 degree conical pipe thread, commonly used in American standard products) and Pt (55 degree conical pipe thread, commonly used in China and more in Japan). If different types of pipe threads are mixed, they may not be screwed in place, resulting in leakage or hidden danger; Even if some are screwed in place, they may not be removed in the future.

(4) The ferrule in ferrule joint is a disposable consumable, which is often lost due to improper storage or construction error (change), so it is necessary to order some spare front ferrule and back ferrule.