首页 > 新闻动态 > 新闻 > stainless steel capillary tube
新闻动态
新闻
  • NPT线程和NPTF线程之间的区别

    1. NPT和NPTF螺纹是美国最常用的锥形管螺纹,用于应用,从电管和扶手到运输气体或腐蚀性液体的高压线。NPT用于机械或低压气体以及需要使用密封剂...
  • 液压管件类型

    液压管件类型 1,NPTF锥形螺纹接头 注意:这是干密封螺纹;它是用于输送燃料的家用锥形管螺纹。它可用于外螺纹和内螺纹末端接头。 NPTF外螺纹可以...
  • 316不锈钢水管较厚

    316条不锈钢水管的产物质量在于其热量和压力抗性,而高温抗性和压力则是...
  • 咬合式管件

    公制螺纹咬合式管接头由主体,切割环和螺母三部分组成,当将切割环和螺母插入钢管上的接头体内并拧紧螺母时,切割的外端密封圈应安装在接头主体的...
  • 2024年春节假期在中国,并注意客户

    亲爱的顾客,中国的2024年春节假期正在临近。祝大家在新的一年中一切顺利 运输通知: 对于需要在新年之前运送的货物,请在2月4日之前通知我们。官...
  • 如何使用管道和管件

    液压系统的管件包括油管和管件,它们连接到各种类型的液压元件上,输送压力油的装置。 管道配件应具有足够的耐压强度(强度),无泄漏,压力损失...
  • 2021年新年快乐

    从2021年2月19日开始,全体员工已开始工作。 祝你新年快乐
  • The Standard for Common Tube Fittings

    National standard (GB), electricity standard (DL), petroleum and petrochemical standard (SY), mechanical department standard (JB), chemi...
  • 带旋转螺母的90度弯头减速器管接头

    90度弯头减速器管接头带旋转螺母伊顿型号:2C9,2D9派克型号:EW产品描述:DIN标准适配器,公制公头24°......
  • 如何防止不锈钢接头腐蚀

    不锈钢接头属于金属制品。它是一种由不锈钢板制成的连接器,因此表明它具有腐蚀的可能性。如何防止不锈钢接头腐蚀? 不锈钢软管接头表面的耐腐蚀...
联系我们
江苏宜城流体设备有限公司
销售经理:Jason Gao
电子邮件:sales01@yc-lok.com.

新闻

stainless steel capillary tube

Luna 2021-05-24 16:12:39
JIANGSU YICHENG FLUID EQUIPMENT CO.,LTD

  Production method of the tubes:
  First of all, finishing, passivation, pickling and solution treatment were carried out on the tube blank, and then high-precision cold drawing was carried out. Under the strong deformation pressure, the rough steel tube products were initially formed; After solution softening treatment in the middle, and then precision cold rolling, the diameter and wall are determined by cold rolling process to control higher tolerance dimensions of outer diameter, inner diameter and wall thickness; In order to ensure the final yield strength, the solution treatment of the finished product adopts the continuous bright solution heat treatment device with atmosphere protection for heat treatment, and adopts the rapid cooling method to obtain the qualified product.

  We confirm that the annealed stainless tubes produced by cold deformation method.

  14% of nickel consisting the tubes.